Almost Mushroom Solid Faux Leather Upholstery Fabric

Description

Shown here in a shade similar to mushroom or taupe, this nylon faux leather upholstery fabric is very durable. The solid color surface has a matte finish and an almost unperceivable animal hide texture.

Fabric Name Almost Mushroom
ID Number 140101-11306YD
Color Taupe
Width 54″
Pattern Repeat 0” Horizontal, 0” Vertical
Fiber Contents 100% Nylon
Vendor Paul Brayton Designs
Finish: –
Backing: –
Fire Codes: California Tech. Bulletin 117 Sec. E Class 1, Astm E-84, Class A, Ufac Class 1, Nfpa-260 Class 1.
Abrasion: 250,000
Cleaning: See Additional Information.
Additional Information: Product Number: Am47. Eco-Textile. Style: Solid. Origin: Usa. Grade: 3. Abrasion Is Between 250,00 And 300,000. Cleaning Instructions: Using A Spray Cleaner (I.E. Fantastik®, Formula 409® Or Simple Green®), Clean With A Paper Towel Or A Soft Rag To Remove Spills And Dirt. If Necessary, A Soft Scrub Brush Can Be Used To Remove Imbedded Dirt. Do Not Use An Abrasive Cleaner (I.E. Comet® Or Soft Scrub®). To Remove Ballpoint Pen, Use The Water-Based Version Of Goof Off 2® And Follow With The Spray Cleaner Directions Above. Be Sure To Use The Water-Based Version (Goof Off 2®) That Comes In An Orange Squirt Bottle. Another Method Of Removing Ballpoint Pen Ink Is To Mix In A Small Cup One (1) Part Wisk® Liquid Detergent (Full Strength) With One (1) Part Rubbing Alcohol. Rubbing Alcohol Is Commonly 70% Isopropyl Alcohol And 30% Water. Wet A Small Portion Of A Soft White Cloth With The Mixture And Apply To The Ink Stain And Blot Up The Stain. Do Not Rub. Rubbing Will Cause The Stain To Spread To A Larger Area. Blot Up The Cleaning Solution With A Dry Cloth. Repeat The Cleaning Process Until The Stain Is Extracted. For Embedded Stains, Dab A Soft Or Medium Bristle Toothbrush In The Cleaning Solution And Gently Brush The Stain In A Very Small Swirling Motion. As The Ink Loosens, Blot Up The Cleaning Solution And Ink With A Dry Cloth. Use As Little Solution As Possible. Very Important! Rinse Completely And Allow To Air Dry. If All The Soap Is Not Removed You Will See A Bluish Residue Or The Surface Will Feel Tacky. Note: Not All Inks Are Composed Of The Same Products/Elements And Therefore Clean Differently. Work In Small Areas. Do Not Over-Wet Area To Prevent Spreading The Stain.